866.4.Maxtec TOLL FREE

NICU Air/Oxygen Blenders

Maxtec uses the leading air/oxygen blending technology in combination with the globally acclaimed Maxtec oxygen monitoring technology. Our MaxBlend Low Flow is the only air/oxygen blender with a built-in monitor. Our Blender Buddy allows users to monitor flow while mixing gas all at once.

 

header dotsMaxFLO2 Air/Oxygen Mixer

For U.S. Export Only

MaxFLO2

24 month warranty

Analyzer sold separately

COMING SOON The all-new MaxFLO2 from Maxtec is an affordable method of mixing and monitoring air and oxygen. The MaxFLO2 is available in two models, a High Flow (0-50 LPM) and a Low Flow (0-10 LPM). Each unit comes equipped with dual flow meters and a mixed gas analysis port for intermittent or continuous monitoring of FiO2. Gas ratios are visibly identified on the face of the unit to allow for fast, accurate flow settings.

 

  • Flow & FiO2 control all in one
  • Mixed gas port for intermittent or continuous monitoring of O2 concentration
  • Low Flow Model: (0-10 LPM)
    Delivers 2-20 LPM at 60% FiO2
  • High Flow Model: (0-50 LPM)
    Delivers 20-100 LPM at 60% FiO2
  • Pole mount included for easy transport or storage
  • Low cost of ownership
  • 24 month warranty

 

 

 

 

Part Numbers

Low Flow MaxFLO2
R223P01
High Flow MaxFLO2
R223P02

Back to Top

header dotsBlender Buddy

Blender Buddy

24 month warranty

Analyzer not included

The Blender Buddy turns your blender into the ultimate blending device. Its robust design provides quality and reliability needed to ensure the ultimate patient care. This product securely attaches to your blender using a specific independent block (see part numbers below) to ensure that it doesn't swivel or move inadvertently. The oxygen port on the top of the manifold allows gas to be analyzed in a clean and dry environment away from the patient to avoid cross-contamination.

 

  • Robust blender extension for 2 flow meters
  • Includes an analyzer port for accurate fiO2 readings
  • Comes standard with a low-flow and high-flow flow meter (0-3.0 & 0-15 lpm)

 

 

 

 

Customize a Blender Buddy with your own flow meter options: Visit our part number generator.

 

Part Numbers (Shown with Standard flow meter options)

For MaxBlend w/standard flow meters
R219P11
For Precision®Blender (Block w/DISS Fittings only)
R219P20
For Bird®, Ohmeda®, Siemens®, Drager®, F&P® Blender w/port
R219P12-001
For Sechrist® Blender w/port
R219P13-001
For BioMed Devices®, Ohio®, Impact®, Adam® Blender w/port
R219P14-001
0-200cc lpm Flow Meter
RP34P03-003
0-1 lpm Flow Meter
RP34P03-004
0-3.5 lpm Flow Meter
RP34P03-002
0-8 lpm Flow Meter
RP34P03-005
0-15 lpm Flow Meter
RP34P03-001
0-70 lpm Flow Meter
RP34P03-006
0-3.0 lpm Flow Meter
RP34P03-007
D.I.S.S.
RP11P06

 

*White colored flow meters are available for international applications.
Please contact Maxtec Customer Service for part numbers and pricing.

 

Back to Top

header dotsMaxBlend Low-Flow

Part Number: R203P05-001

MaxBlend Low-Flow

24 month warranty

Œ

Note: These products are available for international sale through Maxtec only.

 

Maxtec uses the leading air/O2 blending technology in combination with the globally acclaimed Maxtec oxygen monitoring technology. Maxtec offers the only Low-Flow blender with a built-in monitor providing the ability to measure your oxygen percentage in a clean and dry environment away from the patient. This product is especially useful in the NICU.

 

  • Three-in-one blender
  • Helps eliminate cross-contamination
  • Provides measurements free from temperature, pressure & humidity
  • Knob and number all-in-one
  • 15% low to 99% high alarm capabilities
  • 0-30 lpm flow range
  • New complete 24 month warranty
  • Available for international applications only

 

 

View Available Accessories

Back to Top

 

 Available Accessories

  • Wall Mount
    Wall Mount
    [ RP05P07]
  • Pole Mount
    Pole Mount
    [ R100P26 ]
  • Rail Mount
    Rail Mount
    [ R100P09 ]
  • Adjustable Pole Mount
    Adjustable Pole Mount
    [ R100P22 ]
  • Adjustable Wall Mount
    Adjustable Wall Mount
    [ R100P16 ]
  • Accessory Hook
    Accessory Hook
    [ R100P32]
  • 10' Dual Blender Hose
    10' Dual Blender Hose
    [ R129P01 ]
  • 2' Blender Hose
    2' Blender Hose
    [ R129P12 ]
  • Blender Buddy
    Blender Buddy
    [ R219P11 ]
  • Replacement Sensor
    Replacement Sensor
    [ R125P03-002 ]
 

 

CareFusion    BOMImed

header dotsBird® MicroBlenders

Part Number: see below

Bird Blender

24 month warranty

Note: These products are available for international sale through Maxtec only.

 

The versatile 3800&trade Microblender features delivery of accurate FiO2 mixtures from two outlet ports and has an overall flow range of 2-120 LPM, making it ideal for use with ventilators while providing flows to a flowmeter or Blender Buddy. It can also be used as a stand-alone device for mask CPAP, nasal cannula and resuscitation bags.

The Low Flow is perfect for air, ground and in-house transports as well as infant applications. The Low Flow rage is 3-30 LPM or 0-30 LPM with a bleed.

 

  • Accurately delivers FiO2 Mixtures
  • High Flow range of 2-120 LPM
  • Low Flow range of 3-30 LPM (0-30 w/bleed)
  • Discount when purchased with a Blender Buddy
  • 24 month warranty

 

 

Bird Microblender Part Numbers

High Flow w/DISS fittings
R219P25
High Flow w/NIST fittings
R212P95-001
Low Flow w/DISS fittings
R219P24
Low Flow w/NIST fittings
R219P24-001

 

 

View Available Accessories

Back to Top

 

 Available Accessories

Blue indicates accessory comes standard with purchase.

  • Coiled Hose
    Coiled Hose
    [ R127P35 ]
 

 

CareFusion